Blog

Monochrome Liquid Crystal Display (LCD) is one of LCD display technology that can only display a single color. Different from colorful TFT display,  This type of monochrome LCD display typically presents background/image variations of only one color, such as white, green, red, etc. Its structure is illustrated in the figure below: Based on the different monochrome LCD technologies, they can be classified into three main categories: TN (including HTN), STN (including FSTN, DFSTN), and VATN LCD. TN( Twisted Nematic) technology, whose liquid crystal molecules are typically twisted at a 90° angle inside LCD cell. STN( Super Twisted Nematic) technolgy, features a larger twisting angle typically reaching 240°, compared to TN technology . VATN technology, differs from the conventional TN/STN liquid crystal technologies in terms of twisted orientation and crossed polarizers. VATN LCD employs a vertically aligned liquid crystal molecule structure, where the liquid crystal molecules are perpendicular to the electrodes on the LCD substrate. In power off state, the arrangement of VATN liquid crystal molecules is perpendicular to the glass substrate, unlike conventional TN/STN LCDs. This alignment blocks light from passing through the polarizers, resulting in a deep black color. However, when a voltage is applied on both sides, the liquid crystal molecules begin to tilt and collapse, allowing the previously blocked light to penetrate the polarizers, exhibiting a pure white color. This significant enhancement in contrast ratio makes VATN technology visually superior to TN technology. Features of VATN LCD Technology： Advanced Visual Effect: a pure black background for enhanced product elegance. High Contrast: Ultra-high contrast ratio reaching up to 500 or even 1200:1 Ultra-Wide Viewing Angle: Wider viewing angles compared to TN and STN technologies, and full-view VA up to 180° Wide Operating Temperature: with operating temperatures range -30 to 85℃, feasible for automotive applications.   VATN LCD with Color 1.VA LCD with color backlight The most classic visual effect of VA LCD is white text-on pure black background, with the highest contrast. While the backlight of VA LCD is not limited to white. It can also be paired with backlights of other colors, such as red, green, and blue, to create different visual effects. By changing the color of the backlight, VA LCD module could present a richer and more unique color representation, meeting the needs of different application scenarios.   2.VA LCD with color filter or color printing   VA LCD can be also added with color silkscreen printing or color filter technology to enrich the color palette of the fixed displayed content, for example icon, buttons,. This application not only enhances the attractiveness and visual impact of the display but also satisfies user demands for colorful and vivid content. Application Fields: With its high contrast ratio and wide viewing angles, VA LCD has become the popular LCD technology solution in the monochrome display market. It is widely used in various consumer electronics, white goods, smart homes, industrial equipment, and automotive products.  

Capacitive and resistive touch panel are the two main types of touchscreen technology, each exhibit unique characteristics in multiple aspects. Capacitive touch Panel（CTP） The structure of CTP mainly consists of a glass panel, a conductive layer (such as ITO), an insulating layer (such as tempering glass or plastic), and another conductive layer. Its working principle is based on capacitive sensing, achieving touch functionality through human body current sensing. When a finger contacts the metal layer of the touch screen, a coupled capacitance is formed, and the precise location of the touch point is determined by calculating the current ratio flowing through four electrodes.   Advantages of capacitive touch: √  Support for multi-touch function. √  High light transmittance >85% and vivid colors. √  Fast response time is less than 3ms. √  Surface cover covers such as tempered glass of hardness up to 7H, offering excellent scratch resistance and durability. √  Endurance against various contaminants like water, fire, radiation, static electricity, dust, or grease. √  High life expectancy: each touch point capable of enduring over 50 million touches and maintaining cursor stability after calibration. Disadvantages: • High cost. • Incapability being operated with fingernails or insulating materials for touch input. • Unavailability use with gloves or when the screen is wet. • Easy interference from surrounding conductors and temperature variations.     Resistive touch panel(RTP) RTP, consist of a glass or organic glass base coated with a transparent conductive layer (ITO film), and a hardened and scratch-resistant cover whose inner surface is also coated of ITO layer. There are many tiny transparent insulating points between the two layers of conductive layers to separate them.   Resistive touchscreens operate based on the principle of resistance, determining touch location through pressure sensing. When the screen surface is pressed, the top layer is compressed, causing the two ITO layers to contact each other, resulting in a change of resistance value. The controller calculates the coordinates of the touch point based on the detected resistance change and performs corresponding operations accordingly. This technology requires physical pressure on the screen to register a touch.   Advantages of resistive touch: √ Lower cost √ Good response sensitivity and reduced susceptibility to misoperations. √ Ability to withstand various harsh environments, resisting dust and moisture. √ Compatibility perform with any object for touch input, non-conductive objects like pen.    √ Perform feasibility with gloves, or wet screen. Disadvantages: • Support for single-touch only • Slower response speed • Inferior light transmittance compared to capacitive screens • Outer film susceptibility to scratches, potentially rendering the touchscreen unusable • Limited lifetime Expectancy: hitting touch about 1 million and a strokes touch about 100,000 times for 4-wire RTP as an example.   In summary, CTP touch and RTP touch each have their strengths and weaknesses, suitable for different application scenarios.  For instance, capacitive touch may be more suitable for situations requiring high precision, vivid color reproduction, and fast response times, such as smartphones and tablets. On the other hand, resistive touch may be more appropriate for cost-sensitive environments, harsh conditions, or operations involving water or while wearing gloves, such as in industrial equipment and ATMs.  

The interface types used for LCD displays are diverse and versatile, including RGB, MCU, LVDS, and MIPI. Below is a brief overview of the structural principles of these interfaces:   RGB Interface: Its transmits signals for the red, green, and blue color components, which are the fundamental elements for constructing color images. Requires signals such as HSYNC (Horizontal Synchronization Signal), VSYNC (Vertical Synchronization Signal), ENABLE, CS (Chip Select Signal), RESET, and sometimes RS (Register Select Signal). It is primarily used in small to medium-sized LCD display devices, such as 2.0", 2.31", 2.4", 2.8", 4.3", 5.0", 7.0", 9.0", and 10.1" screens.   MCU Interface: It is mainly used in the field of microcontrollers. Widely adopted in smaller-sized mobile phones, featured of cost-effectiveness. Standardized as the 8080 bus standard proposed by Intel, also referred to as DBI (Data Bus Interface), MPU (Microprocessor Interface), or CPU Interface. It includes two modes: 8080 and 6800, differing in timing. It supports data transmission of 8, 16, 18, and 24 bits. Its typical signals such as WR (Write Signal), RD (Read Signal), RS, RESET, and CS. Advantages: simple and convenient control, eliminating the need for clock and synchronization signals. However, it consumes GRAM, limiting its use to smaller screens, typically 4" and below, such as 2.0", 2.31", 2.4", and 2.8" screens.   LVDS Interface: LVDS (Low Voltage Differential Signaling) is a new generation of high-speed, long-distance transmission interface. LVDS interface is also recognized as a low-voltage differential signaling technology interface developed to overcome the drawbacks of TTL-level transmission, such as high power consumption and EMI (Electromagnetic Interference) for broadband high-rate data transmission. Utilizes very low voltage swings (approximately 350mV) for differential data transmission over two PCB traces or a pair of balanced cables. Compared to TTL interfaces, LVDS requires fewer cables, offers higher speeds, and consumes less power. LVDS interface is widely used in high-resolution LCD displays and high-speed transmission applications.   MIPI Interface: MIPI (Mobile Industry Processor Interface) is designed specifically for mobile devices. MIPI Standards is a newly standard with ongoing modifications and improvements. Mostly its mature interface applications include DSI (Display Interface) and CSI (Camera Interface). CSI/DSI refer to their respective applications for cameras or displays, both having complex protocol structures. MIPI interface an transmit multiple data and control signals per clock cycle, making it faster and more capable than TTL and LVDS interfaces. It is widely used in modern smartphones, tablets, and other mobile devices.   Each of these interfaces has unique structural principles, suitable for different application scenarios and device types. When selecting an LCD screen interface for customization, the choice is primarily determined by the client's motherboard interface. Through software driver matching, the screen can be activated, realizing the product's display solution.